The Top 10 Best Balloon Pumps in 2021 | Best Product Review

Have you ever sought the services of a village hall for a party an hour before the event? You can agree that setting up wasn’t the best thing to do in a rush. There is a dreaded task that most organizers and hosts dread-balloon inflation. Time is of the essence if you are rushing to organize a party that has lots of balloons as part of the décor. Balloon pumps could be the best solution in that situation.

Speeding up the filling process needs you to invest in a good balloon pump. It saves you a lot of time, energy, and does the job pretty well. We have grown up filling these rubbers using our mouths but the lightheadedness isn’t something to discuss. You haven’t mentioned how easy you run out of breath and the painful jaws that come with it. Oh! Plus it takes a whole decade.

Luckily, there are simple balloon pumps that come for less. Most online party stores stock them but the logistics of delivery is what makes most people shy away from investing their money. If you are looking to make a balloon centerpiece for your table or a balloon arch or garland, the task has been made easier and shorter.

In this guide, we have put together some of the best balloon pumps for your selection. You might come across a few manual or electric options. Balloon inflation for your parties doesn’t have to be a dreadful activity.

The Top 10 Best Balloon Pumps in 2021

#10. PartyWoo 110V 600W Electric Balloon Pump

Nothing beats the joy of receiving a package that has been completely put together and has everything that you need to fill your balloons. This one comes with three hooks, user instructions, a knot tying tool, flower balloon clips, an electric pump, glue dot sheets, balloon tape, a fishing line, and a metallic ribbon. What is left is a pack of balloons and you to do the hand job.

The noise production is less than 95db which is pretty accommodative. Its input voltage is 110 to 120V with an air pressure of 13000pa, and power usage of 600 watts. The machine is very lightweight and easy to move with to any location as long as there is a source of electricity to run it. The bottom area has anti-slip mats for proper stability. The cable is held by the hand wire storage for safety. It takes 1 to 2 seconds to inflate a 12-inch balloon.

PartyWoo 110V 600W Electric Balloon Pump

Check on Amazon!

  • Below 95db noise
  • 110-120 Volts
  • 600 watts of power
  • 13000pa air pressure
  • Less noise production

  • Comes with everything you need

  • Has anti-slip mats at the base for stability

  • Lightweight and portable

  • No faults yet

#9. MoDuer Balloon Powered Cars

First, there is an age restriction for using this product from the age of three and above. It is a combination of toys that allows children to learn about aerodynamics. It only has four steps for you to begin experimenting. This is a good way to keep children away from tablets or TV. The balloon-powered cars are nontoxic and come with a manual balloon pump, two plastic cars, twelve balloons in different colors, a launch tower, a spaceman, and a rocket. They also make excellent gifting ideas for toddlers.

MoDuer Balloon Powered Cars

Check on Amazon!

  • 05 pounds
  • Nontoxic
  • For children of 3 years and above
  • Comes as a complete set

  • Very easy to install and use

  • A good learning package

  • Comes in different vibrant colors

  • Can be dangerous for kids below the recommended age

#8. Tuomico Electric Professional Inflator

Don’t underestimate its size because this mini balloon inflator will shock you with what it can do. It is extremely lightweight weighing 2.3 pounds and is movable to any spot with ease. It is compact enough to allow for proper storage in smaller spaces. The voltage is 110-120 AC and 330 watts. Its noise is below 86db. We love that it does the job pretty fast at a pressure of 1.5PSI. This means that the machine can inflate so many balloons within a very short time. It comes with a pack of 20 balloons and saves you the extra cost of separately purchasing them.
The machine is compatible with so many types of balloons but won’t work on the twist, long, cartoon options, 360 or 250Q long tail magic balloons, hydrogen, or helium balloons. There is a 30 days guarantee on this product in case you are dissatisfied with the quality, performance, or artistry. Also, it is backed by a one year warranty in case of any defects. You may also like: The Top 10 Best Inflatable Water Park Reviews | Best Guide

Tuomico Electric Professional Inflator

Check on Amazon!

  • 330 watts
  • 110-120 volts
  • Below 86db noise
  • 5PSI
  • Comes with 20 balloons at no added cost

  • One year product warranty

  • 30 days satisfaction guarantee

  • Compact, lightweight, and portable

  • Difficult to blow small metallic balloons because of the small motor

#7. TECHSHARE Electric Balloon Pump

Besides using it for latex balloons, this inflator works well with Mylar balloons, foil balloons, inflatable beds, swimming pools, swimming rings, inflatable toys, inflatable cushions, and compression bags. We love that it is a 2-in-1 design that you can inflate or inhale. Its size is compact, weighs less, and can be moved from one point to another without difficulty. It isn’t used for helium tanks.

The pump comes with six nozzles for use with various inflatable nozzles. You can use the machine outdoors and at home because it comes with a flexible cable. You can hide this cable inside the machine to prevent accidents. Rubber feet offer a very stable grip on any surface. Don’t use it continuously past 60 minutes as it could break down.

TECHSHARE Electric Balloon Pump

Check on Amazon!

  • 180 cm cable
  • Improved air pump
  • 1.1kgs
  • 6 nozzles
  • Highly portable

  • Extremely lightweight

  • Rubber feet for good grip

  • Longer cable for flexibility

  • Not for helium balloons

#6. Heboland Balloon Electric Air Inflator

A multipurpose balloon pup comes in handy when you have other inflatable products and toys in the home that you often use. It saves you time, storage space, and money because of its versatile use. The machine comes with three nozzles that you can choose from. You can use it to inflate or deflate products.

We love that you can use it with or without a power supply. It has a manual and an automatic function that you can choose at your convenience. The voltage is 100 to 120 with a frequency of 50/60Hz. It comes with wire storage to keep the cable out of the way when you don’t need it. The power is 600 watts.

Heboland Balloon Electric Air Inflator

Check on Amazon!

  • 600 watts
  • 100-120 volts
  • 50/60Hz frequency
  • 3 nozzles
  • Both manual and automatic

  • Comes with nozzles

  • User-friendly design

  • Versatile option

  • None so far

Read More  Top 10 Best Handheld Frothers in 2021 | Top Product Review

#5. Pumteck 2-in-1 Electric Balloon Pump

The manufacturer builds this balloon pump with different modes to inflate different products. There is the balloon mode that is specifically for the balloon. You can do this by switching the semi-auto inflation setting. The airflow for this machine is 600L/min at a pressure of 14KPa. It saves about 95% of your time by inflating so many balloons within a very short time.

You can use the pump to seal storage bags. It deflates them pretty fast compared to a manual pump. It also comes with a knot tying tool to complete the inflation process.

Pumteck 2-in-1 Electric Balloon Pump

Check on Amazon!

  • 600L/min
  • 14K Pa pressure
  • 15 minutes of continuous working time
  • 10 to 60 degrees C working temperature
  • Multipurpose

  • Wider suction outlet

  • Has a knot tying tool

  • Different modes available

  • Heats up after some time

#4. Pumteck 2-in-1 Electric Balloon Pump

A good quality electric balloon pump saves more time than a manual one would. The machine is very easy to use and you can inflate your products by following very few steps. The size of the balloon will depend on your preference and décor pattern. As a lightweight air pump, it is very portable and can be carried from one spot to another. The heft is manageable even for children.

The package comes with a garland kit, a balloon arch, two balloon tying tools, two tape stripes, and two glue craft dots. This makes the inflation process very easy. There are two nozzle sizes to fit different balloon mouths.

Pumteck 2-in-1 Electric Balloon Pump

Check on Amazon!

  • Two nozzles
  • Two operation modes
  • 110-120V
  • Comes as a complete package

  • Extension tips are present

  • Long cable

  • Gets hot with continuous use

#3. Dr. Meter Balloon Pump

How powerful your air pump motor is will determine if it will save your time or not. This one has a 600 watts motor to improve its efficiency and make balloon filling a fun thing to do. There are footpads at the bottom for stability and preventing slips. The power line is hidden inside the cable compartment for safety, to save space, and keep your working or storage area less cluttered.

It comes with two operation modes-a fully automatic mode and a semi-automatic mode. The former does the inflation pretty fast while the latter controls the flow of air into the balloon. Nozzle tips are extra-long to allow for easier inflation of your balloons. The machine weighs 3lbs and comes with a carry handle for convenience while moving around with the air pump.

Dr. Meter Balloon Pump

Check on Amazon!

  • 110-120 volts AC
  • Two modes
  • 2 glue stickers
  • Lightweight

  • Portable

  • Ergonomic handle

  • Comes with a few accessories

  • Louder than most machines

#2. KINBON Electric Portable Inflator

Advancements in technology are making life’s tasks simpler each day. Today, party preparations are less stressful than before because of life-saving machines like air pumps. This electric balloon pumps use good quality air inflated ball and it is safe. However, your balloons will not fly. These will work for garlands or balloon centerpieces.

Weighing about 3.47 pounds, the machine is extremely lightweight and portable. You can move it to your desired location with ease as long as there is a source of electricity.

KINBON Electric Portable Inflator

Check on Amazon!

  • 47 pounds item weight
  • 115 balloons
  • 15 minutes of working time
  • Comes a full package

  • Takes a few seconds to fill a balloon

  • Lightweight

  • Portable

  • Gets hot after more than 15 minutes of use

#1. IDAODAN Portable Electric Balloon Inflator

Having heavy balloon pumps are hectic to move around with? You will love how lightweight this one is and you can move from one spot to another. This machine weighs 1.3kgs. It has a pressure of 1.75psi at a voltage of 110-120. The frequency is 50/60Hz. Its air volume is 750L/min and 600W power. It only works for decorative and latex balloons. There is a one-year warranty on this product in case of any defects in material, craftsmanship, or performance.

IDAODAN Portable Electric Balloon Inflator

Check on Amazon!

  • Frequency 50/60Hz
  • 3kgs
  • 110-120 V
  • Pressure of 1.75psi
  • Lightweight

  • Portable

  • One-year warranty

  • Nothing yet

Buying Guide

Voltage: The voltage of your balloon air pumps should range between 100 and 120 volts to ensure that its functionality is top-notch.

Motor: How much wattage your motor produces will determine if you will execute the job quickly or take as much time. A wattage between 300 and 600 is just fine.

Noise: We won’t lie that these machines are silent. They produce noise and depending on the one you choose, it could be louder or bearable. To know how much noise yours produces, check the decibels.

Accessories: While some machines come with their accessories included in the package, others come with none. Purpose to purchase a balloon pump that has all accessories in the package. Some also include a few balloon pieces to make your purchase exclusive.

Warranty: Not all balloon air pumps come with product warranties. There are some whose manufacturers offer repairs and replacements at a small fee.


Balloon inflation can turn from a dreaded activity to a fun one for both adults and kids. Investing in the right balloon pump will make your preparation easier, save your time, and money. Remember to stick within the working temperature and time to avoid damaging your machine.

Be the first to comment

Leave a Reply

Your email address will not be published.